Horizontal split case fire pumps (UL / FM Approved FLHC series)

The FLHC series are Horizontal split case fire pumps.

Variety & Range

  • Discharge range: 400 to 2500 USgpm
  • Head range: 66 to 244 psi.
  • Rated speed: 1470, 1770, 2350 2900, 3000 rpm

50Hz Motor Details

  • Discharge range: 400 to 3000 USgpm
  • Head range: 66 to 244 psi.
  • Rated speed: 1770, 2900 rpm

Applications

The FLHC fire pumps shall be used in fire-fighting applications for supplying water to fire hose reels, fire hydrants or sprinkler systems in areas which are prone to the hazards of fire. The typical applications are as follow:

  • Commercial complexes and high rise buildings
  • Petrochemical industries and Gas plants
  • Oil and Gas on-shore &off-shore platforms
  • Oil terminals
  • Airports and ports
  • Jetties
  • Marine applications
  • Power stations and transformer stations
  • Chemical industries
  • Manufacturing plants
  • Fire-work industries
  • Warehouses/godowns.

 

Features

  • Installations of these pumps would ensure the safety of human life, buildings, expensive plants and equipments. FLHC fire pumpset shall be used only where a positive suction is provided as specified in NFPA20.
  • Diesel engine as well as electric motor driven pump.
  • Automatic air relief valve
  • Suitable for space saving installation systems and retrofit applications
  • The pump casing shall be of Cast Iron grade FG 260 as per IS 210 / ISO 186 with radial suction and discharge port, bronze casing wear ring, closed type dynamically balanced impeller, steel shaft.
  • The pump shaft sealing shall either be by gland packing or by mechanical shaft seal of following construction, suitable for 16 bar pressure rating and water temperature from 0 to +90 deg C.
  • The pump shall be long coupled with a totally enclosed fan cooled type induction motor, with F class insulation, S1 duty and IP55 protection, suitable for 3 phase, 415 volts, 50 and 60 Hz power supply.
  • The split case construction shall enable removal and dismantling of the internal pump parts like ball bearings, wear rings, shaft seal and impeller without disturbing the motor & pipe work.

Reviews

There are no reviews yet.

Be the first to review “Horizontal split case fire pumps (UL / FM Approved FLHC series)”

Your email address will not be published. Required fields are marked *